Hide Flash Menu
Bursa Announcement latest updates [11/05/2012]
GI Compliance report/MSDS latest updates [20/04/2012]
Unpresented Dividend Cheques [10/04/2012]
GI Compliance report/MSDS latest updates [09/03/2012]
PPGI Compliance report/MSDS latest updates [09/03/2012]
Quarterly Report latest updates [13/02/2012]
 
 
  Specification & Application Introduction Manufacturing Process

  PPGI Specification
BMT Thickness 0.176 ~ 1.200mm
Paint Thickness Topcoat : 14 ~ 30 µm
Back coat : 5 ~ 18µm
Primer : 2 ~ 6µm
Width (mm) 914 ~ 1250
Steel Grade JIS G3312 : CGCC, CGC340, CGC400, CGC440, CGC490, CGC570
ASTM : CS, FS, SS
EN10326: S250GD, S280GD, S320GD, S350GD, S550GD
EN10327: DX51D+Z, DX52D+Z
I.D (mm) 508 / 610

Application of PPGI
Category
Requirement
Coating System
Commo n Spec
Typical Usage
Photo
Outdoor Exposure Purpose
General shielding condition *Rural, urban
 PE Exterior JIS G3312 CGCC CGC340 CGC400 CGC490 CGC570 Roofing, Cladding, Fencing, Sandwich, Panel
Extreme shielding condition *Coastal, Industrial
 PVDF
Themo control
 Ever Cool
Anti dirt staining
 Ever Fresh®
Indoor Fabrication Purpose
High formability (OT no crack) Hiflex JIS G3312 CGCC Ceiling Tee Strip
Electrostatic dissipative function
 Antistat Clean room spec wall panel

PPGI Typical Properties
Properties
Typical Results
Remark
Solvent Resistant
MEK > 100 DB
  
T-bend
 OT-4T (NTO),
OT (NTO), 1T no crack 		For Hiflex
Pencil Hardness
 Min H
Min F		 For PVdF
Reverse Impact
 No adnesion failure after 10 Joules impact (2 kg, 50 cm)  
Erichsen Cupping Test
 No adhesion failure after depth cupping:
5 mm
3mm
For CQ
For SQ
Cross Hatch
 100/100 ok (1mm)  
Boiling Test
 No adhesion or appearance failure after 2 hrs soaking in boiling water  
Carbon stain resistant
 ΔE<5 after 2 hrs baking in 80°C For Everfresh
Resistivity
1x106 ~ 1x109
 For Antistat



Specification & Application

Ever Fresh

PE-Exterior

PE-Hiflex

PVDF

Ever Cool


About Us | Products | Location Map | Contact Us | Staff Webmail
   © 2010 CSC Steel. All Rights Reserved.